Brass Fibre/Chips

Made from the combination of Copper & Zinc, Brass has excellent machining qualities .As a high density material brass chips are ideal for industrial parts .Its hardness & workability makes one of the most versatile machining material available. The properties of steady braking, durability, excellent heat-sinking capacity, stable friction factor, low noisy are unavailable in any single alternative material. So they are widely used in brake manufacturing of motorcycles, automobiles, trains and planes.

Product Description
Properties:
-- Low noise
-- Excellent heat conduction
-- High friction coefficient


Applications:
Raw friction material for:
-- Disc brake pads
-- Drum brake linings
-- Clutch linings etc.
For all the Applications mentioned above we offer the following grades:

Brass Chips (Fine) & Brass Chips (Coarse)


Physical & Chemical Properties:   

Properties
Apparent Density	Fine	Coarse
(gm/cm2)	2.0 – 3.0	1.2 – 3.5
Screen Analysis: Mesh +20 +40 +50 +100 -100	- 5 (max) 30-70 20-65	1 (max) 10-45 - 50-80 12 (max)

Note: we can also provide according to customers specification
Packaging (Standard):
Brass Chips has a three stage packaging .First in Polyliners Followed by HDP bags (50 Kg) .Then Packed in MS drums for dispatch.
*Packaging is also provided as per customer’s request.